Nikon SB-910 - Specifications

H–12
H
Tips on Speedlight Care and Reference Information
Specifi cations
External power
source
Batteries
Min. recycling time
(approx.)*
1
Min. number of fl ashes*
1
/
recycling time*
1
Nikon High-
performance Battery
Pack SD-9*
2
1.5 V LR6 (AA-size) alkaline × 4 1.9 sec. 280/1.9 – 30 sec.
1.5 V FR6 (AA-size) lithium × 4 2.4 sec. 500/2.4 – 120 sec.
1.2 V HR6 (AA-size) rechargeable
Ni-MH (eneloop) × 4
1.2 sec. 350/1.2 – 30 sec.
1.5 V LR6 (AA-size) alkaline × 8 1.2 sec. 450/1.2 – 30 sec.
1.5 V FR6 (AA-size) lithium × 8 1.6 sec. 840/1.6 – 120 sec.
1.2 V HR6 (AA-size) rechargeable
Ni-MH (eneloop) × 8
0.8 sec. 520/0.8 – 30 sec.
Power Bracket Unit
SK-6/SK-6A*
2
1.5 V LR6 (AA-size) alkaline × 4 2.2 sec. 190/2.2 – 30 sec.
1.5 V FR6 (AA-size) lithium × 4 3.2 sec. 420/3.2 – 120 sec.
1.2 V HR6 (AA-size) rechargeable
Ni-MH (2600 mAh) × 4
1.9 sec. 240/1.9 – 30 sec.
1.2 V HR6 (AA-size) rechargeable
Ni-MH (eneloop) × 4
1.9 sec. 230/1.9 – 30 sec.
Nikon DC Unit SD-7
1.5 V LR14 (C-size) alkaline × 6*
3
2.0 sec. 320/2.0 – 30 sec.
1.2 V HR14 (C-size) rechargeable
Ni-MH × 6*
4
1.5 sec. 280/1.5 – 30 sec.
1.2 V HR14 (C-size) rechargeable
Ni-MH × 6*
5
1.5 sec. 260/1.5 – 30 sec.
Nikon High-
performance Battery
Pack SD-8A*
2
1.5 V LR6 (AA-size) alkaline × 6 2.0 sec. 300/2.0 – 30 sec.
1.5 V FR6 (AA-size) lithium × 6 2.2 sec. 550/2.2 – 120 sec.
1.2 V HR6 (AA-size) rechargeable
Ni-MH (2600 mAh) × 6
1.5 sec. 260/1.5 – 30 sec.
1.2 V HR6 (AA-size) rechargeable
Ni-MH (eneloop) × 6
1.5 sec. 250/1.5 – 30 sec.
*1 The Speedlight fi res at full output once every 30 seconds (120 seconds with lithium
batteries).
*2 The same type of batteries used with both the SB-910 and the external power source
*3 1.5 V LR6 (AA-size) alkaline batteries used with the SB-910
*4 1.2 V HR6 (AA-size) rechargeable Ni-MH batteries (2600 mAh) used with the SB-910
*5 1.2 V HR6 (AA-size) rechargeable Ni-MH batteries (eneloop) used with the SB-910
With fresh batteries. Performance may vary depending on remaining battery power or battery •
specifications.
When the SB-910 is used with the SD-8A or SK-6/SK-6A, the modeling illuminator lights up •
using power provided only by the batteries in the SB-910 and not from the SD-8A or SK-6/
SK-6A. This is not a malfunction.