B–18
B
Operation
Test fi ring fl ash output level in i-TTL mode (0E-21)
M1/128: Approx. 1/128
M1/32: Approx. 1/32
M1/1: Full
FX/DX format selection (0A-6)
When the zoom head position is manually set, image area
settings can be selected.
FX±∞ DX: Automatically set according to the camera’s image area
FX: Nikon FX format (36 × 24)
DX: Nikon DX format (24 × 16)
Canceling power zoom function (0E-19)
Activating or canceling power zoom function
ON: Power zoom function canceled
OFF: Power zoom function activated
AF-assist illumination/canceling fl ash function (0E-20)
Activating or canceling AF-assist illumination and fl ash function
ON: Both AF-assist illumination and fl ash function activated
OFF: AF-assist illumination canceled, fl ash function activated
AF ONLY: AF-assist illumination activated, fl ash function canceled (only
AF-assist illuminator lights up)
Standby function (0E-22)
Adjusting the time before the standby function is activated.
AUTO: Standby function activated when the camera’s exposure
meter is turned off
40: 40 seconds
80: 80 seconds
160: 160 seconds
300: 300 seconds
---: Standby function canceled
To Next Page
Loading...
