C–4
C
Flash Modes
v When insuffi cient fl ash output for correct exposure is indicated
When the flash-ready indicators on the •
SB-910 and in the camera’s viewfinder blink
for approx. 3 seconds after a picture is taken,
underexposure due to insufficient flash
output may have occurred. To compensate,
use a wider aperture or higher ISO sensitivity,
or move the flash unit closer to the subject
and reshoot.
• Amount of underexposure due to insufficient
flash output is indicated by the exposure
value (−0.3 EV to −3.0 EV) on the SB-910’s
LCD panel for approx. 3 seconds.
Press function button 3 to redisplay exposure •
value.
To Next Page
Loading...
