D–13
D
Wireless Multiple Flash-unit Photography
SU-4 Type Wireless Multiple Flash-unit Photography
Flash modes for the master flash unit
When used in master mode, the SB-910 can operate in auto aperture fl ash, non-TTL
auto fl ash, distance-priority manual fl ash and manual fl ash modes. (0D-4)
To set the fl ash mode, press the [MODE] button,
choose the fl ash mode with the selector dial,
and then press the [OK] button.
v Canceling the master fl ash unit monitor pre-fl ash function
Correct exposure cannot be obtained when the master fl ash unit emits monitor pre-
fl ashes with SU-4 type wireless multiple fl ash-unit photography.
The SB-910 does not emit monitor pre-flashes when used in master mode.•
When the master flash unit is not the SB-910, make sure the master flash unit •
monitor pre-flash function is canceled. See the master flash unit user’s manual for
instructions on how to cancel this function.
To Next Page
Loading...
