Nilfisk-Advance SC800 Service Manual

Service Manual: SC750, SC800, SC 750 ST, SC800 ST
Form Number 56043150 Page 85
5. Slide new brush into housing. Rotate and li the end to engage the drive hub anges with the slots in the end of
the brush.
6. Posion idler pulley in brush end and seat the idler cover at against the brush head
7. Tighten the hand wheel nut, making sure that the slots in the idle cover line up and engage the brush head.

Nilfisk-Advance SC800 Specifications

General

Brand	Nilfisk-Advance
Model	SC800
Category	Scrubber
Language	English