Nivus OCM PRO CF - Page 22

Instruction manual
OCM Pro CF
page 22 OCM Pro CF - Rev. 09 as of 07.06.2016
®
1
Mounting plate
2
Acoustic coupling layer
3
Flow velocity sensor for positive flow direction
4 Water-ultrasonic level sensors (optional)
5 Electronics
6
Pressure sensor (optional)
7
Duct for pressure measurement (optional)
8
Temperature sensors (sensors without pressure cell only)
9 Protective cover for sensor cable and protective hose fastening
10 Sensor cable
11
Protective hose (optional)
Fig. 6-4 Basic design CS2 wedge sensor
1
Mounting plate
2
Acoustic coupling layer
3 Temperature sensor
4 Flow velocity sensor
5
Cable gland
6
Sensor cable
Fig. 6-5 Basic design CSM wedge sensor V100