OCM Pro CF
OCM Pro CF - Rev. 09 as of 07.06.2016 page 55
Depending on the user’s status the following functions are either accessible or
locked:
Viewer
- operational conditions, progress lines, sensor status etc. can be selected
and viewed
- saved data and parameter files can be downloaded
- settings can be selected but cannot be modified permanently
- data files cannot be deleted
- no updates possible
Operator
- operational conditions, progress lines, sensor status etc. can be selected
and viewed
- saved data and parameter files can be downloaded
- device settings can be modified permanently
- data files can be deleted
- memory card can be formatted
- device updates possible
Administrator
All rights see operator level. Additionally:
- setting up new units
- administration of unit levels, sub-users and operating levels
Depending on the type of transmitter (see Chapter 2.5) there are various ways
for data communication. Select from:
- Ethernet
- Analog modem
- ISDN modem
- GSM/GPRS modem
Important Note
Using remote access options is associated with connection costs on the part
of the instrument as well as on the part of the operator/viewer. These costs
depend on:
- Providers choice
- Connection time
- Connection period
- Flat rate or similar arrangement
They are not influenced by NIVUS.
The system administrator is responsible for the amount of future communica-
tion expenses arising.
To Next Page
Loading...
