Nokia 6090 - CLIP Calling Line Identification Presentation; CLIR Calling Line Identification Restriction

Nokia 6090 AT Command Set 25
<classx>:
is a sum of integers each representing a
class of information (default 7 equals to all
classes):
1
voice
2
data
4
fax
also all other values below 128 are
reserved
Examples:
AT+CLCK="PS",1,"12345"
Locks Phone to SIM card with “Security code” confirmation (“12345”).
AT+CLCK="FD",1,"0000"
Locks SIM card fixed dialling memory after PIN2 confirmation (“0000”).
The barring service commands are network dependent. “FD” and “SC” are SIM
dependent. If you have problems ask your network operator if you have the rights to
change this values.
+CLIP Calling Line Identification Presentation
Controls presentation of +CLIP unsolicited result code or returns CLIP subscription
status from network. Nokia 6090 does not support network status query, <m> equals
always 2. (GSM 07.07)
Syntax:
AT+CLIP=[<n>]
Default option is 0.
AT+CLIP?
Query current setting.
Response is +CLIP: <n>,<m>
AT+CLIP=?
Show supported values.
Response is +CLIPLlist of supported
<’>'s).
Parameters:
<n>:
0
Disable
1
Enable
<m>:
shows the subscriber CLIP service
status in the network
2
unknown
+CLIR Calling Line Identification Restriction
Enables/disables own number sending to network or returns CLIR subscription status
from network. (GSM 07.07). The Nokia 6090 does not support network status query,
<m> always-equal 2.
Syntax:
AT+CLIR=[<n>]
Default option is 0.
AT+CLIR?
Query current setting.
Response is +CLIR: <n>,<m>
AT+CLIR=?
Show supported values.
Response is +CLIR: (list of supported
<n>’s).
Parameters:
<n>:
2
CLIR suppression
<m>:
shows the subscriber CLIR service
status in the network
2
unknown