Nokia 6090 - CMS ERROR Values: Kinds of Errors

Nokia 6090 AT Command Set 76
Copyright © 2001. Nokia Mobile Phones. All rights reserved.
AT Command +CMS <err> Value Kinds of Errors
+CMGD=
301 5
310 2
311 3
312 1
316 4
320 6
321 8
+CMGC=
0-127 9
128-255 10
301 5
304 11
305 12
310 2
311 3
312 1
316 4
330 7
331 16
+CMS ERROR Values: Kinds of Errors
1
phone security code required to execute the AT command
2
ME does not have a SIM connected to it
3
SIM PIN required to execute the AT command
4
SIM PUK required to execute the AT command
5
SMS interface is reserved by some other application
6
general memory error; e.g. problems in SIM database
communication
7
message to be sent to network does not contain SMSC address
and SMSC address cannot be found from TA or ME
8
memory location does not exist
9
RP layer cause value from network
10
TP layer cause value from network
11
PDU mode is enabled: length of the given PDU is not
equivalent with the given <length>, or ME/TA detects that PDU
is of invalid format
12
text mode is enabled: too long message is tried to be
sent/stored, or +CSMP does not contain valid SMS-SUBMIT (in
case of +CMGS=), or ME/TA detects that PDU is of invalid
format
13
SMS memory is full
14
<index> given in +CMSS does not contain SMS-SUBMIT or
SMS-COMMAND, or <index> given in +CMSS contains SMS-
COMMAND and <da> is given
15
no +CNMA acknowledgement expected
16
no network service