Nokia 6090 - CSSN Supplementary Service Notifications; CSTA Select Type of Address

Nokia 6090 AT Command Set 49
+CSSN Supplementary Service Notifications
Controls presentation of +CSSI intermediate result code and +CSSU unsolicited
result code. (GSM 07.07.)
Syntax:
AT+CSSN=[<n>[,<m>]]
Default option is 0, 0.
AT+CSSN?
Query current setting.
Response is +CSSN: <n>,<m>
AT+CSSN=?
Show supported values.
Response is +CSSN: (list of supported
<n>'s), (list of supported <m>'s)
Parameters:
<n>:
parameter sets/shows the +CSSI result
code presentation status in the TA:
0
disable
1
enable
<m>:
parameter sets/shows the +CSSU result
code presentation status in the TA:
0
disable
1
enable
+CSTA Select Type of Address
Dial command D uses always this setting except when dial string includes
international access code character (+). In this case type of address sent to the
network defaults to 145 (international/telephony). (GSM 07.07)
Syntax:
AT+CSTA=[<type>]
Select type. Default option is 129.
AT+CSTA?
Query current setting.
Response is +CSTA: <type>
AT+CSTA=?
Show supported types.
Response is +CSTA:(list of supported
<type>'s).
Parameters:
<type>:
type of address octet in integer format
(refer GSM 04.08 )
129
ISDN / telephony numbering plan, national
/ international unknown
145
ISDN / telephony numbering plan,
international number includes international
access code character "+"