Nokia 6090 - CMGC Send Command; CMGD Delete Message

Nokia 6090 AT Command Set 27
<mode>:
2
buffer unsolicited result code in the TA
when TA-TE link is reserved and flush
them to the TE after reservation;
otherwise forward them directly to the TE
<keyp>:
0
no keypad event reporting
2
keypad event reporting using result code
+CKEV: <key>,<press>
<displ>:
0
no display event reporting
<ind>:
0
no indicator event reporting
1
indicator event reporting using result code
+CIEV: <ind>, <value>.
<ind> indicates the indicator order number
as specified for +CIND and <value> is the
new value of the indicator
<bfr>:
0
TA buffer of unsolicited result codes
defined within this command is cleared
when <mode> 1..3 is entered
Example:
AT+CMER=2,2,0,1
This command enables unsolicited keypad and indicator result codes.
+CMGC Send Command
Text/PDU entering as specified in 07.05. If SMSC address is not set/restored during
the current session (i.e. +CSCA? returns +CSCA: "",129) it must be automatically
read from SIM/ME (location 1). In PDU mode, all kind of GSM 03.40 MO TPDUs can
be sent with this command (operation equals to +CMGS). (GSM 07.05)
Syntax:
text mode (+CMGF=1):
AT+CMGC=<fo>,<ct>[,<pid>[,
<mn>[,<da>[, <toda>]]]]<CR>
text is entered <ctrl-Z/ESC>
Response is (+CMGF=1) and sending ok:
+CMGC: <mr>[,<scts>]
Default option is text mode
[2,0,0,0,"",129/145]
PDU mode (+CMGF=0):
AT+CMGC=<length><CR>
PDU is given <ctrl-Z/ESC>
Response is (+CMGF=0) and sending ok:
+CMGC: <mr>[,<ackpdu>]
AT+CMGC=?
OK
+CMGD Delete Message
Execution command deletes message from preferred message storage <mem1>
location <index>. If deleting fails, final result code +CMS ERROR: <err> is returned.
(GSM 07.05)
Syntax:
AT+CMGD=<index>
AT+CMGD=?
OK