Nokia 6090 - CPAS Phone Activity Status

Nokia 6090 AT Command Set 36
This commands forces a manual network selection to operator “26202”
1 - manual network selection
2 - operator code is given in numeric format
“26202” - operator
AT+COPS=0
This command activated automatic network selection.
AT+COPS=?
This command show all available networks.
Response:
+COPS: (1,,,"24407"),(2,,,"24702"),,(0,1),(2)
OK
Explanation:
1,,”24407” - operator “24407” can be seen and is available (1)
2,,”24702” - operator “24702” is the current network (2)
+CPAS Phone Activity Status
Returns the general status of ME. TA and ME are in one physical entity, test
command reports still that <pas>=1 is available although it will not be reported ever.
(GSM 07.07)
Syntax:
AT+CPAS
Response is +CPAS:<pas>.
AT+CPAS=?
Show supported values.
Response is +CPAS: (list of supported
<pas>'s)
Parameters:
<pas>:
0
ready (ME allows commands from TA/TE)
1
unavailable (ME does not allow
commands from TA/TE)
3
ringing (ME is ready for commands from
TA/TE, but the ringer is active)
4
call in progress (ME is ready for
commands from TA/TE, but a call is in
progress)