14-14 Help
Send DTMF
— Transmits Dual Tone Multi-Fre-
quency tones. This function helps you communi-
cate with answering machines, computerised
telephony systems, etc. For more details, see
"Sending DTMF tones".
All sounds (Menu 10)
You can select the indication mode for incoming
calls and all alerts from the following options.
This setting affects both interfaces. You can ad-
just the 10 "System: System settings").
Ring
— A ringing tone will sound and the phone
interface will flash its display lights.
Beep
— One short beep will sound and the phone
interface will flash its display lights.
Silent
— Turns on the silent service: the commu-
nicator will flash its display lights. No tones will
be heard, including keypad and warning tones.
When silent service is selected, the text SILENT
will be shown on the display in the idle mode.
Keypad lock (Menu 11)
The keypad lock prevents the keypad keys being
accidentally pressed when the communicator is,
for example, in your pocket. The keypad can be
locked or unlocked even during a call.
When the keypad lock is on:
To answer a call, press normally. During
a call, the keypad is unlocked and the com-
municator can be operated in the normal way.
After the call, the keypad lock is automatical-
ly turned back on.
The keypad lock will be automatically turned off
when the communicator is connected to a car
kit. When the communicator is removed from the
car kit, without being switched off previously,
the keypad lock will be activated automatically
again.
To activate the keypad lock:
Press
Menu
and use or to reach the
menu
Keypad lock
.
Press
Select
.
Or, alternatively
Press
Menu
and then the key within 5
seconds of the first press.
While the keypad lock is active, the text KEYPAD
LOCKED and the
Unlock
selection key are dis-
played all the time.
To deactivate the keypad lock:
Press
Unlock
and then the key within 5
seconds of the first press.
Note:
When the keypad lock is on, calls may be
possible to the emergency number programmed
into your communicator (e.g., 112 or other offi-
cial emergency number).
Help
Most menu functions are provided with a help
text, which gives a brief description of the dis-
played function. Enter the menu facility about
which you want help. Now you can view the help
text of the function in two ways:
Wait for 5 seconds. The first page of the help text
will appear. The text is scrolled automatically.
Or, press . The first page of the help text will
appear. For additional pages, press as many
times as necessary.
Once you have read the text, either press
Select
to enter the function or press
Quit
to return to
the title screen.
While reading a help text, you can move to the next
or previous menu function by pressing or .
daphne.frm Page 14 Wednesday, January 15, 1997 1:48 PM
To Next Page
Loading...
