Chapter 3 - Contacts 3-1
3. Contacts
The Contacts application is used to create, edit,
delete and manage all contact information, such
as phone numbers and addresses. This contact
information is used by the phone interface and
the Telephone, Fax, SMS and Mail applications.
Contacts also logs all incoming and outgoing
voice calls, data calls, faxes and short messages,
see "Logs".
Contact cards
The Contacts main view shows the Contacts di-
rectory. The Contacts directory is a list of all con-
tact cards. The contact cards are listed in
alphabetical order according to the name in each
contact card’s
Name
field.
To create a new contact card, press
New
in the
Contacts main view.
To open an existing contact card, locate the con-
tact card you want to open and press
Open
. A
contact can be located in two ways:
Scrolling the contact list – Move the selection
frame with the scroll buttons until the con-
tact you are searching for is shown within the
selection frame
Using the search field – Enter text into the
search field. The search looks for matches in
the
Name
,
Company
and
Address
fields. The
search results can be cleared by deleting
characters one by one from the search field
with the backspace key.
To delete a contact card, open the card and press
Delete card
(see figure 3-1).
Editing contact cards
When you have opened a contact card, you can
enter new and edit existing contact information
in the various fields. To move from one field to
another, use the scroll or arrow keys. You can add
lines to the
Address
and
Note
fields with the En-
Figure 3-1
contacts.frm Page 1 Thursday, January 16, 1997 3:51 PM
To Next Page
Loading...
