Chapter 10 - System 10-7
To stop using communicator as a fax modem,
press
Disable
.
Operations of a modem can be controlled by AT
commands and S-registers. These commands
give the advanced user an opportunity to control
all the features of the modem. However, it is not
always necessary to enter the AT commands
manually. Most PC communications applications
have a user-friendly interface that hides the AT
commands from the user. Should you need to en-
ter the commands manually, consult the docu-
mentation of the PC application that you are
using. A list of the common AT commands (based
on the ETSI 07.07 standard) supported by the No-
kia 9000 Communicator are available as an ASCII
text file on the diskette that came with the sales
package of your communicator.
When the communicator is used as a fax modem,
its normal communication features are disabled
(otherwise, the applications remain functional).
If an active PC connection is idle for longer than
20 minutes, the fax modem mode is automati-
cally disabled to conserve power. However, when
the communicator is connected to an electrical
outlet (for example, while charging a battery),
the time-out is not active.
To change the Fax modem settings, press
Set-
tings
and select:
Connection type: Infrared
(recommended)
/
Cable
— The cable connection is intended for
use with the communicator’s own PC connec-
tivity applications for backup, file transfer,
export/import and software installation pur-
poses. The functionality of a cable connection
when the communicator is used as a fax mo-
dem is not guaranteed.
User data
The User data card contains your personal infor-
mation. You can freely edit the information in
the
Name, Company, Job Title, Address, Tel, Fax
,
Tel(GSM)
,
Fax(GSM)
and
Mail
fields.
The Fax application automatically includes the
information in the User data card in the corre-
sponding fields of the fax cover page. The SMS
application uses this information when you send
your own business card.
Memory
This view shows the amount of available free
memory for storing data and for installing new
software.
If the memory is getting low, you should delete
some documents. Before deleting, you can send
them or transfer them to a PC.
About this product
This view displays information about the Nokia
9000 Communicator.
system.frm Page 7 Wednesday, January 15, 1997 2:16 PM
To Next Page
Loading...
