7-16 Terminal connection
Terminal connection
When you have connected to the remote system,
the following commands become available:
Press
Keys
to emulate the VT100 special keys
which are not available on the communicator
keyboard. The special keys include four program-
mable function keys (PF1-4), all VT100 applica-
tion keypad keys (numbers 1-9, minus, comma,
period, dash, enter) and the following VT100
functions: reset terminal, Ctrl-\, Ctrl-], Ctrl-~.
The selected special character is entered to the
left of the cursor by pressing
Insert
.
Press
Zoom in
if the whole emulated screen and,
consequently, character size is too small. The
Zoom out
command returns the unzoomed view.
When the view is being zoomed, the scroll keys
can be used to switch between the upper and
lower parts of the terminal screen.
Press
Texts
to activate the text transfer com-
mands, see “Telnet: Text transfers.”
Press
Hang up
to close the connection to the
host, end the data call and return to the Terminal
application main view.
The scroll up/down buttons can be used for
scrolling the view. Scrolling does not affect the
cursor position. Pressing any keyboard key re-
turns the view to the cursor position.
Figure 7-9
inet.frm Page 16 Wednesday, January 15, 1997 12:46 PM
To Next Page
Loading...
