10-6 Import/Export calendar data
Import/Export calendar data
The Import/Export calendar data application al-
lows you to export calendar data (events, event
details and to-do list) onto a PC and import it
back to the communicator. The calendar data is
exported to the PC as a single ASCII text file,
cal-
endar.txt
. You can edit the calendar data the
same way as exported contact cards. Note that
memos attached to the events are referenced in
the
calendar.txt
file, but not exported (to export
memos, use the File Transfer application).
The main view shows the connection type used
and the default path in the PC. To change the
connection settings, press
Settings
.
To import calendar data:
Press
Import
in the Import/Export calendar
data main view. When the data in the defined
PC directory has been copied to the commu-
nicator you will be asked to confirm the con-
version of the imported data as calendar data.
Note:
The imported calendar data will replace
all your current calendar data.
To export calendar data:
Press
Export
in the Import/Export calendar
data main view. If a file with the default
name (
calendar.txt
) already exists on the PC,
the existing file will be overwritten.
Data removal
The Data removal application comes in handy if
you want to remove personal information from
the communicator, for example, before lending it
to someone else. This way you do not need to re-
move data one by one.
The removable data is arranged in four groups:
All data, Calendar data, Documents, Contacts and
Speed dials
Select the desired data group in the normal way
by moving the selection frame and press
Delete
.
Before any data is removed, you must enter the
lock code (see "Security"). When deleting calen-
dar data, you can choose to delete all calendar
data or only events that occur before a given
date.
If you want to restore your communicator in the
same state it was in at the time of purchase, see
chapter 15 “Troubleshooting: 4. Resetting the
communicator”.
Fax modem
The Nokia 9000 Communicator can be used as a
9600 bps PC fax modem. Using the communica-
tor as a fax modem requires that data calls are
supported by the network you are using and that
this service is activated for your SIM card. If you
want to receive data calls, your SIM card also
needs a data number. Contact your home service
provider for details.
Connect the communicator to the PC via an in-
frared link as described in "Connecting to a PC"
After connection has been established, you can
change the communicator to a fax modem by
pressing
Activate
in the Fax modem main view.
When the communicator is used as a fax modem,
the call status indicator shows the text MODEM.
system.frm Page 6 Wednesday, January 15, 1997 2:16 PM
To Next Page
Loading...
