Nokia 9000 - Logs

Chapter 3 - Contacts 3-3
The DTMF special characters are listed in the
following table:
Logs
The Contacts application shows all communica-
tion events as two logs: the General log and the
Individual log. The logs show the same informa-
tion in different ways. The General log shows all
(or certain types of) communication events in
chronological order, see figure 3-2. The individu-
al log shows a list of all communication events
relating to the selected contact.
To access the logs:

Press
Logs
in the Contacts main view. The
command set changes.

Select the desired log type by pressing either
Individual log
or
General log
.
To erase the contents of the log:

Press
Clear lis
t. A pop-up box opens to let you
define which contacts will be deleted (meas-
ured in days). The clearing procedure reflects
on the other log, as well.
To create a new contact card:

Open the General log.
Character Function
* and #
May be used if the DTMF
service requires them
p (pause)
Inserts a pause of 2.5 sec-
onds in front of, or between,
DTMF digits
w (wait)
When the “w” character is
stored in a sequence, the
rest of the sequence is not
sent until you press
Send
again in the Telephone
application.
Table 3-1
Figure 3-2
contacts.frm Page 3 Thursday, January 16, 1997 3:51 PM