Chapter 2 - Getting started 2-5
Communicator interface
The communicator interface is activated by
pressing the cover lock catch and opening the
cover (see figure 2-9).
The applications are run in the middle of the dis-
play. The indicators (see figure 2-10) show appli-
cation and system related information (see
“Indicators” in this chapter). The commands al-
ways relate to the column of four command but-
tons on the right side of the display cover.
In this User’s Manual, the command names ap-
pear in
bold
and item names, entries and values
shown on the application area are in
italics
.
Whenever the selection frame is shown, you can
select items by moving the selection frame with
the scroll buttons or the up/down arrow keys (see
“Keyboard” in this chapter).
Figure 2-9
Figure 2-10
getting.frm Page 5 Thursday, January 16, 1997 4:09 PM
To Next Page
Loading...
