Chapter 14 - Phone interface 14-11
operator for subscription. See chapter 4 "Tel-
ephone: Telephone settings - Voice call bar-
ring". Within this submenu you can choose
the following call barring modes:
Outgoing
calls (Menu 5 3 1), International calls
(Menu 5 3 2), Int except to home country
(Menu 5 3 3)
,
Incoming calls (Menu 5 3 4),
Incoming calls if abroad (Menu 5 3 5)
,
Can-
cel all barrings (Menu 5 3 6).
Note:
Call barrings made via the phone inter-
face only apply to voice calls. Fax barrings are
made in the Fax application’s settings (chap-
ter 5) and data barrings are made in the Inter-
net main settings (chapter 7).
View fixed dial list (Menu 5 4)
Within this submenu, you can review the con-
tents of the fixed dialling list that you created
within Menu 5 5. If you have selected
Off
in the
Menu 5 5, calls to all numbers are possible.
Fixed dialling (Menu 5 5)
You may restrict your outgoing calls to a pre-
determined set of phone numbers. This ‘fixed
dialling’ function works only with SIM cards
which support it. When the function is set on,
you can only call a phone number which is in-
cluded in the fixed dialling list or which be-
gins with the same digit(s) as a phone number
on the list.
Enter the PIN2 code. Select
On
(set the func-
tion on),
Off
(set the function off) or
Numbers
(to edit the fixed dialling list). If you selected
Numbers
, the first name in the list will be dis-
played.
Press
Option
and choose
Erase all, Add, Re-
move
or
Edit
. The
Remove
and
Edit
options af-
fect the name (and the associated phone
number) which was on the display when you
pressed
Option
.
Change access codes (Menu 5 6)
Within this submenu, you can change the fol-
lowing access codes: lock code (Menu 5 6 1),
PIN code (Menu 5 6 2), PIN2 code (Menu 5 6
3), Barring password (Menu 5 6 4). See chap-
ter 10 "System: Security".
Note:
The access codes may only include dig-
its 0 to 9.
Closed user group (Menu 5 7)
This network service allows the restriction of
outgoing calls to and incoming calls from a
selected group of people. For details on creat-
ing a user group and activating this service,
contact your network operator. You may be a
member of up to 10 user groups (the groups
need not necessarily be assigned numbers
from 1 to 10).
Select one of the following options:
None
— Calls can be made and received in the
normal way. This option overrides all other user
group settings. You can use this option only if
you are entitled to do so.
Preset
— Use a preferential user group that the
SIM card owner has agreed upon with the net-
work operator.
Set—
Use a particular user group. Calls can be
made to or received from the members of the se-
lected group only.
System lock (Menu 5 8)
When the system lock is activated in this
menu, the communicator will lock immedi-
ately. Even if you remove and replace the bat-
tery and switch on the phone interface, the
communicator will remain locked.
The communicator can also be locked auto-
matically if the Lock time-out feature is
turned on in the communicator interface (see
chapter 10 "System: Security").
To lock the communicator, press
Select
to ac-
tivate the lock code prompt and enter the lock
code. The communicator locks immediately.
To unlock the communicator, press
Unlock
and enter the lock code.
Note:
To prevent the communicator from lock-
ing itself again after the time-out period, de-
activate the option in the Security application
settings (see chapter 10 "System: Security").
Duration and cost (Menu 6)
Within this menu, you can view the duration and
cost of your outgoing and incoming calls, reset
the timers and counters, limit the duration of
calls and select whether the call costs are shown
in charging units or units of currency.
Note:
The actual time invoiced for calls and serv-
ices from your service provider may vary, de-
daphne.frm Page 11 Wednesday, January 15, 1997 1:48 PM
To Next Page
Loading...
