• Radio measurements — Enable or disable the
radio measurements.
• Power saving — Select whether to use the WLAN
power saving mechanism to save the power in the
device battery. Using the power saving mechanism
enhances the battery performance but may weaken
WLAN interoperability.
To restore all settings to their original values, select
Options > Restore defaults.
WLAN security settings
Select Menu > Tools > Settings > Connection >
Access points > Options > New access point, or
select an access point and Options > Edit.
In the access point settings, select WLAN security
mode and the desired mode.
WEP security settings
Select WEP as the WLAN security mode.
The wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the
network is denied to users who do not have the
required WEP keys. When the WEP security mode is in
use, and your device receives a data packet not
encrypted with the WEP keys, the data is discarded.
In an ad-hoc network, all devices must use the same
WEP key.
Select WLAN security settings and from the following:
• WEP key in use — Select the desired WEP key.
• Authentication type — Select Open or Shared.
• WEP key settings — Edit the settings for the WEP
key.
WEP key settings
In an ad-hoc network, all devices must use the same
WEP key.
Select WLAN security settings > WEP key settings
and from the following:
• WEP encryption — Select the desired WEP
encryption key length.
• WEP key format — Select whether you want to
enter the WEP key data in ASCII or Hexadecimal
format.
• WEP key — Enter the WEP key data.
802.1x security settings
Select 802.1x as the WLAN security mode.
802.1x authenticates and authorises devices to access
a wireless network, and prevents access if the
authorisation process fails.
Select WLAN security settings and from the following:
• WPA/WPA2 — Select EAP (Extensible
Authentication Protocol) or Pre-shared key (a
secret key used for device identification).
140
Settings
To Next Page
Loading...
Need help?
General
Weight and Dimensions
