Refresh. Use this option if your WLAN is not shown on
the list.
To select a net call service for outgoing calls if the
device is connected to more than one service, select
Options > Change service.
To configure new services, select Options >
Configure service. This option is shown only if there
are services that have not been configured.
To save the network to which you are currently
connected, select Options > Save network. The
saved networks are marked with a star on the list of
networks.
To connect to a net call service using a hidden WLAN,
select Options > Use hidden network.
To end the connection to a net call service, select
Options > Disconnect from service.
Make net calls
You can make a net call from all applications where you
can make a regular voice call. For example in Contacts,
scroll to the desired contact, and select Call > Internet
call.
To make a net call in the home screen, enter the SIP
address, and press the call key.
To make a net call to an address that does not start with
a digit, press any number key when the device is in the
standby mode, then press # for a few seconds to clear
the display and to switch the device from the number
mode to the letter mode. Enter the address, and press
the call key.
To set net call as the preferred call type for outgoing
calls, select Menu > Communic. > Internet tel. >
Options > Settings > Default call type > Internet
call. When your device is connected to a net call service,
all calls are made as net calls.
Net call service settings
Select Options > Settings, scroll to the settings of the
desired service, and press the scroll key.
To login automatically to the net call service, select
Login type > Automatic. If you use the automatic
login type for WLANs, the device periodically scans for
WLANs, which increases the demand on battery power
and reduces the battery life.
To login manually to the net call service, select Login
type > Manual.
To view the networks you have saved for the net call
service and the networks detected by the net call
service, select Saved conn. networks.
To define the service-specific settings, select Edit
service settings. This option is only available if a
service-specific software plug-in has been installed in
the device.
87
Phone
To Next Page
Loading...
Need help?
General
Weight and Dimensions
