5. Slide the back cover back to place.
Charge the battery
1. Connect a compatible charger to a wall outlet.
2. Connect the power
cord to the device. If
the battery is
completely
discharged, it may
take a while before
the charging indicator
starts scrolling.
3. When the battery is fully charged, disconnect the
charger from the device, then from the wall outlet.
Your battery has been precharged at the factory, but
the charging levels may vary. To reach the full
operation time, charge the battery until it has been
fully charged according to the battery level indicator.
Tip: If you have old compatible Nokia chargers,
you can use them with the Nokia E66 by
attaching the CA-44 charger adapter to the old
charger. The adapter is available as a separate
enhancement.
Insert the memory
card
Use a memory card to save the memory on your device.
You can also back up information from your device to
the memory card.
Memory card may already be inserted in your device.
Memory cards are also available as separate
enhancements.
1. With the back of the device facing you, press the
release buttons (1) and slide the back cover off (2).
18
Set up your device
To Next Page
Loading...
Need help?
General
Weight and Dimensions
