To set a new lock code, select Phone and SIM card >
Lock code. The preset lock code is 12345. Enter the
current code and then the new code twice. The new
code can be 4-255 characters long. Both alphabets and
digits can be used, and both uppercase and lowercase
alphabets are possible. The device notifies you if the
lock code is not properly formatted.
Restore original settings
To restore the original device settings, select Factory
settings. To do this, you need your device lock code.
After resetting, the device may take a longer time to
power on. Documents, contact information, calendar
entries, and files are unaffected.
Telephone settings
Select Menu > Tools > Settings > Phone.
Select from the following:
• Call — Define general call settings.
• Call divert — Define your call divert settings.
See
"Call divert", p. 88.
• Call barring — Define your call barring settings.
See "Call barring", p. 88.
• Network — Adjust the network settings.
Call settings
To display your phone number to the person you are
calling, select Call > Send my caller ID > Yes. To let
the network determine whether your caller ID is sent,
select Set by network.
To display your net call address to the person you are
calling using a net call, select Call > Send my internet
call ID > Yes.
To be notified of a new incoming call while you have a
call in progress, select Call > Call waiting >
Options > Activate. To check if the function is active
on the network, select Options > Check status.
To select whether net calls alert or not, select Call >
Internet call alert. You are notified of missed net calls
with a notification.
To set the default call type, select Call > Default call
type and select Voice call if you make a GSM calls, or
Internet call if you make net calls.
To send a text message automatically to the person
who is calling you informing why you cannot answer
the incoming call, select Call > Reject call with
SMS > Yes. To set the text for the message, select
Call > Message text.
Network settings
Select Menu > Tools > Settings > Phone >
Network.
137
Settings