MJ-62 Module repair jig
MJ-62 is meant for component level trouble shooting The jig includes
RF interface for GSM and Bluetooth.
General features include:
• Provides mechanical interface for engine module
• Provides galvanic connection to all needed test pads in module
• UI test interface
• Audio components MIC, earpiece, stereo IHF
• Unlimited operation of a disassembled RM-70 phone module
• Power supply via CU-4
Note: CU-4 is needed to operate MJ-62. CU-4 is not part of the
MJ-62 sales package and has to be ordered separately.
PCS-1 Power cable
The PCS-1 power cable (DC) is used with a docking station, a module
jig or a control unit to supply a controlled operating voltage.
PKD-1 SW security device
SW security device is a piece of hardware enabling the use of the
service software when connected to the parallel (LPT) port of the PC.
Without the device, it is not possible to use the service software.
Printer or any such device can be connected to the PC through the
device if needed.
RJ-68 Soldering jig
This soldering jig is used for module level repair, either as fixation
in μBGA rework places or when there is a need to hold a module on
the work bench for any other repair.
Features include:
• Convenient locking mechanism
• Four (optional mount) rubber feet allow usage also on repair
benches
• Fixation of phone module in both ways possible (bottom or top side
up)
• ESD proof material
• Standard uBGA jig thickness and outer dimensions
RM-70
Service Tools and Service Concepts Nokia Customer Care
Issue 1 COMPANY CONFIDENTIAL Page 4 –9
Copyright © 2005 Nokia. All rights reserved.
To Next Page
Loading...
