Maintenance
5-5
Nozzle Cleaning
@ontd.)
D
,
4203026
Fig. 5-4 Cleaning a Nozzle with a
Pin-Type Probe
4. Semiannual Maintenance
Items Needed
Semiann
ual
Mai ntenance
Procedure
8. Clean the nozzle bore using a
pin-type
probe,
and
wipe with a cloth
soaked
in
Nordson
Type R fluid as needed.
9. Reattach the
nozzle
to
the
gun
10. Restore the system to
normal operation by following the
startup
procedures
in
the applicator
product
manual.
@
@
WARNING:
Hot!
Risk
of burns.
Wear heat-protective clothing,
safety
goggles,
and
heat-protective
gloves.
.
appropriate
protective
clothing
o
3-mm
(1/8-in.)
Phillips screwdriver
lnspect the handgun twice a
year
as follows:
1. Relieve system
pressure
following the
instructions in
your
applicator
product
manual.
@
1995 Nordson
Corporation
All rights reserved
42-72
lssued 10/95
AsEN-06-[AD-31 EX]-1
To Next Page
Loading...
