Chapter 2 Customizing the client 37
Configuring the Contivity VPN Client
MSDUN13PATH=Path The path to the directory where MSDUN13.exe is
located on the CD; the path specified for this variable
is searched.
NoChangeProfiles=1 Restricts modifications to client profiles from the
client, and no new profiles can be added or users
can change only the dial-up numbers (if appropriate),
their user name and password (tokencode/pin fields,
if appropriate), certificate and password, and nothing
else.
If set to 1, only the prepackaged baynet.tbk file is
used, and no new profiles can be added.
Without any changes to the setup.ini file, the remote
user can change profiles by default.
PreserveTBKFile=1 During custom installation, if a baynet.tbk file is in the
installation directory, the file will be copied to the
user during installation.
By default, if PreserveTBKFile is not present in the
setup.ini file, or if it is set to 0, the baynet.tbk file in
the installation directory will always overwrite the one
in the user's directory (compatible with previous
versions' default behavior).
If set to 1, the baynet.tbk file will only be copied if
there is not an existing one in the user's directory.
Otherwise, the original file will be preserved.
ProductName=New Product Name Client, if nothing is set.
RemovePPTP=1 If set to 1, this always removes PPTP on Windows
98, if detected during installation. A user can verify
that PPTP has been removed by opening the
Network Control Panel and verifying that Dial-up
Adapter #2 and the Microsoft Virtual Private Network
Adapter have been removed. The default is 0 and
does not remove PPTP.
ReceiveBuffers=200 Allows receive buffers to be set to an integer greater
than or equal to 8 and less than or equal to 500. If
not set, the default value is 20. Note: Due to
characteristics of various networks, satellite
networks in particular, a larger number of buffers
may be required to achieve optimum results.
SendBuffers=200 Allows send buffers to be set to an integer greater
than or equal to 8 and less than or equal to 500. If
not set, the default value is 20. Note: Due to
characteristics of various networks, satellite
networks in particular, a larger number of buffers
may be required to achieve optimum results.
Table 4 [Options] section and keyword settings for setup.ini file (continued)
Field Description
To Next Page
Loading...
