EasyManua.ls Logo

Notifier NFS-640 - Section 4 Applications; Overview

Notifier NFS-640
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NFS-640 Installation Manual P/N 51332:B1 12/01/2003 57
Section 4 Applications
4.1 Overview
Municipal Box (Auxiliary)
Municipal Box applications require a TM-4 Transmitter module. Refer to the Transmitter Module TM-4
installation document for installation details.
Chapter Covers the following topics
Section 4.2 “NFPA 72-
1999 Central or Remote
Station Fire Alarm System
(Protected Premises Unit)”
How to install UDACT with the control panel for use as a NFPA Central
or Remote Station Fire Alarm System (Protected Premises Unit)
Section 4.3 “NFPA 72-
1999 Proprietary Fire
Alarm Systems”
How to set up a Protected Premises Unit to communicate with a listed
compatible Protected Premises Receiving Unit.
Section 4.4 “Fire/Security
Applications”
How to use the control panel as a combination Fire/Security system,
including the following:
• Installing a Security Tamper Switch into the cabinet
• Circuit Wiring
Section 4.5 “Releasing
Applications”
How to install the following releasing applications:
• a Releasing Device to the Control Panel (NAC integral circuits)
• a Releasing Device to the FCM-1 Module
• an NBG-12LRA Agent Release-Abort Station

Table of Contents

Other manuals for Notifier NFS-640

Related product manuals