parameter is set to “Rest” no note is played on the selected step & finally when the “Gate” parameter is set to “Glide” the
Portamento is engaged when the selected step switches to the next step & then the Portamento is switched off. This is great for
creating those TB303 type patterns with slides.
The “Fill In” parameter does not apply for Polyphonic patterns & does nothing if switched “On” or “Off”.
Glide will only work when the polyphony of the Program / Part is set to Mono.
Several Monophonic & Polyphonic patterns can be used at once in a Performance. One doing a Bass type Pattern, One doing a
TB303 thing, One doing a “Classic” Up[/Down thing etc. etc. It is even possible to have the Arpeggiators in the different programs
synchronised to different time signatures. When doing this turning the “Speed” knob will alter the speed of all the arpeggiators, in
other words it is not possible to have arpeggiators running on different clock speeds, if you wish the arpeggiators to run at differing
speeds set the “Sync” parameter in the Arpeggiators to differing values.
To Next Page
Loading...
