OSCILLATOR SECTION
Sync - Button
Level - Knob
This combination controls the Sync Effect on the selected Oscillator. Turning the Level Knob fully clockwise introduces the maxi-
mum Sync Effect fully to the selected Oscillator & fully anticlockwise there is no Sync Effect at all. The range of this parameter is
000 to 127.
This does not apply to the Noise, 1*3 & 2*3 Ring Modulator outputs. No audible effect to these sound sources will be heard if an
attempt is made to adjust this parameter when these sound sources are selected & the display will show “Not Available”.
Sync - Button
Mod Depth - Knob
LFO 1 - Button
This combination controls the modulation of the Sync Effect on the selected Oscillator by LFO 1. Turning the Mod Depth Knob fully
clockwise introduces Sync Effect from LFO 1 to the selected Oscillator in a Positive direction. Turning the Mod Depth Knob fully anti-
clockwise introduces Sync Effect from LFO 1 to the selected Oscillator in a Negative direction. In the “Mid” position there is no modula-
tion at all. The range of this parameter is -64 to +63.
This does not apply to the Noise, 1*3 & 2*3 Ring Modulator outputs. No audible effect to these sound sources will be heard if an
attempt is made to adjust this parameter when these sound sources are selected & the display will show “Not Available”.
Sync - Button
Mod Depth - Knob
LFO 2 - Button
This combination controls the modulation of the Sync Effect on the selected Oscillator by LFO 2. Turning the Mod Depth Knob fully
clockwise introduces Sync Effect from LFO 2 to the selected Oscillator in a Positive direction. Turning the Mod Depth Knob fully anti-
clockwise introduces Sync Effect from LFO 2 to the selected Oscillator in a Negative direction. In the “Mid” position there is no modula-
tion at all. The range of this parameter is -64 to +63.
This does not apply to the Oscillators that have the Noise, 1*3 & 2*3 Ring Modulator outputs. No audible effect to these sound
sources will be heard if an attempt is made to adjust this parameter when these sound sources are selected & the display will show
“Not Available”.
Sync - Button
Mod Depth - Knob
ENV 2 - Button
This combination controls the modulation of the Sync Effect on the selected Oscillator by ENV 2. Turning the Mod Depth Knob fully clock-
wise introduces Sync Effect from ENV 2 to the selected Oscillator in a Positive direction. Turning the Mod Depth Knob fully anticlockwise
introduces Sync Effect from ENV 2 to the selected Oscillator in a Negative direction. In the “Mid” position there is no modulation at all. The
range of this parameter is -64 to +63.
This does not apply to the Noise, 1*3 & 2*3 Ring Modulator outputs. No audible effect to these sound sources will be heard if an
attempt is made to adjust this parameter when these sound sources are selected & the display will show “Not Available”.
Sync - Button
Mod Depth - Knob
ENV 3 - Button
This combination controls the modulation of the Sync Effect on the selected Oscillator by ENV 3. Turning the Mod Depth Knob fully
clockwise introduces Sync Effect from ENV 3 to the selected Oscillator in a Positive direction. Turning the Mod Depth Knob fully
anticlockwise introduces Sync Effect from ENV 3 to the selected Oscillator in a Negative direction. In the “Mid” position there is no
modulation at all. The range of this parameter is -64 to +63.
To Next Page
Loading...
