FILTER SECTION
Possible Combinations & the effects Produced.
The range of all these parameters is -64 to +63. All these parameters are memorised with a Program.
Frequency - Button
Mod Depth - Knob
LFO 1 - Button
This combination controls the amount of change to the Filter Cutoff Frequency ( Initially set by the Frequency knob ) by LFO 1. In
the central position there is no change to the Filter Cutoff Frequency. Anticlockwise of centre there will be an increasing amount of
Negative modulation. i.e. The Filter will be closed more by LFO 1. Clockwise of centre the modulation is Positive. i.e. The Filter will
be increasingly opened by LFO 1.
Frequency - Button
Mod Depth - Knob
LFO 2 - Button
This combination controls the amount of change to the Filter Cutoff Frequency ( Initially set by the Frequency knob ) by LFO 2. In
the central position there is no change to the Filter Cutoff Frequency. Anticlockwise of centre there will be an increasing amount of
Negative modulation. i.e. The Filter will be closed more by LFO 2. Clockwise of centre the modulation is Positive. i.e. The Filter will
be increasingly opened by LFO 2.
Frequency - Button
Mod Depth - Knob
ENV 2 - Button
This combination controls the amount of change to the Filter Cutoff Frequency ( Initially set by the Frequency knob ) by ENV 2. In
the central position there is no change to the Filter Cutoff Frequency. Anticlockwise of centre there will be an increasing amount of
Negative modulation. i.e. The Filter will be closed more by ENV 2. Clockwise of centre the modulation is Positive. i.e. The Filter will
be increasingly opened by ENV 2.
Frequency - Button
Mod Depth - Knob
ENV 3 - Button
This combination controls the amount of change to the Filter Cutoff Frequency ( Initially set by the Frequency knob ) by ENV 3. In
the central position there is no change to the Filter Cutoff Frequency. Anticlockwise of centre there will be an increasing amount of
Negative modulation. i.e. The Filter will be closed more by ENV 3. Clockwise of centre the modulation is Positive. i.e. The Filter will
be increasingly opened by ENV 3.
Frequency - Button
Mod Depth - Knob
Wheel - Button
This combination controls the amount of change to the Filter Cutoff Frequency ( Initially set by the Frequency knob ) by the Mod
Wheel. In the central position there is no change to the Filter Cutoff Frequency. Anticlockwise of centre there will be an increasing
amount of Negative modulation. i.e. The Filter will be closed more by the Mod Wheel. Clockwise of centre the modulation is
Positive. i.e. The Filter will be increasingly opened by the Mod Wheel.
Resonance - Button
Mod Depth - Knob
LFO 1 - Button
This combination controls the amount of change to the Resonance ( Initially set by the Resonance knob ) by LFO 1. In the central
position there is no change to the Resonance. Anticlockwise of centre there will be an increasing amount of Negative modulation.
i.e. The Filter will become less resonant by LFO 1. Clockwise of centre the modulation is Positive. i.e. The Filter will become more
resonant by LFO 1.
To Next Page
Loading...
