FILTER SECTION
Page 5 looks like so:
The parameter is “Special type filter width”. In this case with a value of 00.
This parameter determines the spacing/offset in Filter cutoff frequencies between the two elements of the “Special” filters. This is a
duplicate of the Filter width parameter that is displayed when the special page is active. The reason for this is that it was found to
be nice for the display to jump back to this parameter when editing & as this parameter is duplicated here in this menu it will do
exactly that. This can provide “Formant” type filters & speech like qualities can be easily realised. The Filter width is calibrated in
semitones & a range of pre-set intervals are available. The range of this parameter is 00, 08, 16, 24, 32, 40, 48 & 56. Note that the
Resonance modulation Knob in the Filter Modulation Matrix actually modulates the “Filter width” parameter & not the resonance
when the “Special” filters are selected. The Resonance knob still retains its function as filter Resonance when in this mode. This
parameter is memorised with a program.
Adjusting the value of this parameter will alter the value in the Special page. It is not possible to have different values set in the 2
pages.
To Next Page
Loading...
