10
Connecting Power Head to Dome
Assembling the Full NuWave Oven
NuWave Oven Pro Plus
Assembly Guide
Lock
Place Power Head on the rim of the Dome and lock
it into place by rotating the Power Head clockwise
until the locking lugs are engaged.
Place Base Tray on a firm, stable surface.
Place Liner Pan inside Base Tray. When doing so,
make sure the handles are in the dropped down
position. If the handles are not fully dropped, the
Dome may not fit over the base properly.
Place dual level Cooking Rack on the Liner Pan
according to cooking requirements.
Place food on the rack.
Place Dome with Power Head over food, connecting
to the Base Tray. The Dome should fit evenly onto
the base.
Set cook time and temperature according to recipe
requirements.
BEFORE USING:
Prior to the first use of your NuWave Oven, wash Dome,
Liner Pan, Base, and Cooking Rack in warm soapy water or
run through a dishwasher cycle.
IMPORTANT - Do not wash or immerse Power
Head in water or cycle through dishwasher. The outer
surface may be cleaned by wiping carefully with a
damp dishcloth or sponge.
Owner’s Manual
To Next Page
Loading...
