11
Step 3
Place the assembled Power Head and Dome at a 45°
angle on the holder as shown.
Note: Do not leave Dome in Dome Holder for an
extended period of time.
Only lift Dome by the handles on the Power
Head. Once the Power Head and the Dome are
assembled, the handles will allow you to lift both
together when removing or checking food. When
removing Liner Pan after cooking, be extremely
careful and always use oven mitts.
For best results, follow the time, temperature, and
Cooking Rack height instructions provided in the
cooking chart and recipe book.
No preheating required.
How to Install and Use Dome Holder
Make sure the Power Head is tightly locked onto the Dome. The
whole assembly can be easily lifted and put aside as shown in steps
1, 2 and 3.
Step 1
Place Dome Holder under either side of base
handle.
Step 2
Make sure both feet of the Dome Holder are situated
inside the handle, and the Dome Holder is resting
horizontally on a flat surface.
Cooking Instructions
Owner’s Manual
To Next Page
Loading...
