9
The Time-to-Fly display (Fig. 7) begins a 24 hour countdown starting 10
seconds after a dive. During the last 12 hours, the countdown can be deacti-
vated and subsequent diving continued by pressing the activation switch.
This reactivates the PRODIGY and begins the Surface Display/Pre Dive
Planning Sequence over again. After the timer reaches zero, 24 hours have
elapsed. You may choose when to fly according to the type of diving you
have done, consulting your PRODIGY to determine the amount of surface
time that has elapsed. To learn more about flying after diving and DAN's
guidelines, see page 24.
DETAILED OPERATIONS GUIDE
The next section describes the PRODIGY’s Operational Modes and
Informational Displays in detail, describing exactly what you can expect to
see above and under water. Refer to this section when you have specific
questions about PRODIGY operation.
Fig. 7 – Time-to-Fly Mode
®
To Next Page
Loading...
