43
computer console and first stage allowing easy removal when not in use (if
you have a console version). This allows you to keep the PRODIGY nearby
when recording dives in your log book or planning the next dive.
DURING THE DIVE
Keep the PRODIGY protected from abuse underwater by using the
console retainers on your B.C. If you let it hang freely, expect scratches to
cover the display face after only a few dives. You also may damage delicate
corals or marine life while jarring sensitive electronic components.
AFTER THE DIVE
Soak the PRODIGY in fresh water after each dive. If possible, use luke-
warm water to dissolve any salt crystals. Salt deposits can also be dissolved
using a slightly acidic vinegar/water bath. After removal from a fresh water
bath, place the PRODIGY under gently running water. Be sure to flush any
holes or slots on the rear of the boot. Towel dry the computer before storing.
Transport the PRODIGY cool, dry, and protected.
WARNING - Never, under any circumstances, poke any object
through any slots or holes on the rear of the PRODIGY. Doing so
may damage the depth sensor, possibly resulting in erroneous
depth and/or dive time remaining displays.
To Next Page
Loading...
