UNIX 101
# /usr/sbin/lpshut
b. Add the following line to the /etc/inetd.conf file and register the
remote spooler.
printer stream tcp nowait root /usr/sbin/
rlpdameon –I
c. Restart inetd
# /etc/inetd –c
6. Register the remote printer
Example: setting up a queue called PRINTER_lp to print to host PRINTER
d. Register the remote printer.
# /usr/sbin/lpadmin -pPRINTER_lp -v /dev/null
-mrmodel \-ormPRINTER -orplp -ocmrcmodel
-osmrsmodel -ob3
e. Activate the print queue.
# /usr/sbin/accept PRINTER_lp
f. Enable the print queue.
# /bin/enable PRINTER_lp
g. Enable the printer spooler.
# /usr/sbin/lpsched
To customise output, for example, to add additional commands at the start of
each print job, you can edit a copy of the /usr/spool/lp/model/rmodel model
file then add it using the lpadmin command.
Example: for printer PRINTER_lp, with model file called PRINTER_model
# /usr/sbin/lpshut
# /usr/sbin/lpadmin –pPRINTER_lp –mPRINTER_model
# /usr/sbin/lpsched
To Next Page
Loading...
