Microsoft Windows 84
5. In the [Select Network Component Type] dialogue box, select
[Protocol] then [Add].
6. In the [Select Network Protocol] dialogue box, select [Microsoft]
from the list of manufacturers, then select [NetBEUI] from the list
of [Network Protocols] and then click [OK].
7. The Windows installation CD-ROM may be required. Follow the
remaining dialogue box prompts.
Windows NT 4.0
1. Click the [Start] button, select [Settings] and then [Control Panel].
2. Double-click the [Network] icon.
3. In the [Network] dialogue box, click the [Protocols] tab.
4. If the [NetBEUI Protocol] is not listed, click [Add].
5. In the [Select Network Protocol] dialogue box, select [NetBEUI
Protocol] and click [OK].
To Next Page
Loading...
