Oki B4300 User Manual

UNIX 103
# startsrc –s lpd
# mkitab ‘lpd:2:once:startsrc –s lpd’
5. Add the print queue using the smit command.
c. Activate the smit command and convert to the item [Add print
queue].
# smit mkrque
d. Select [remote] (the printer connected to the remote host) from
[Type of connection].
e. Select [Standard procedure] from Type of remote print.
f. Carry out the following settings in [Add a standard remote print
queue]. If the configuration differs from below, configure
according to environment.
Example: fr direct output port lp with print queue okiprinte_lp and print
server okiprinte
Queue to be added “printer_lp”
Host name of the
remote server “printer”
Queue name of the
remote server “lp”
Type of print spooler
of the remote server “BSD”
Description of printer name
of the remote server “Optional comment”
LPD Printing
Line Printer Daemon (LPD) is the most common protocol for printing
with TCP/IP to a network printer. Refer to the workstation’s manual for
details of lpr and lp commands. The following explanation in this section
uses the printing of print file test.prn with printer name PRINTER_lp as
an example.

Oki B4300 Specifications

General

Brand	Oki
Model	B4300
Category	Print Server
Language	English