Oki B4300 User Manual

Configuration 37
Option Menu
In the [Option] menu, the following item can be selected:
Help Menu
In the [Help] menu, [About] is available as well as revision information
for AdminManager.
Item Function
Use TCP/IP Protocol If this item is selected, AdminManager uses TCP/IP protocol to search/
configure network interface cards.
Use IPX/SPX
Protocol
If this item is selected, AdminManager uses IPX/SPX protocol to
search/configure network interface cards.
Environment Setup TCP/IP Tab Set broadcast addresses that are used to search
OKI network interface cards using the TCP/IP
protocol. If [Use TCP/IP protocol] is
unchecked, the search will not be carried out
using TCP/IP.
NetWare Tab Set network addresses that are used to search
OKI network interface cards via NetWare
protocol. If there any many NetWare file
servers on your network, specify the network
address to which the network card belongs. If
[Use NetWare protocol] is unchecked, the
search will not be carried out using NetWare,
but if [Auto Search] is selected,
AdminManager will search all networks that
AdminManager can detect.
TimeOut Tab [Search Every]: Set response waiting time from
a network card in seconds.
[Time Out]: Set time out between
AdminManager and the network interface card
in seconds.
[Retry]: Set how many times the retry will be
carried out between AdminManager and the
network interface card.

Oki B4300 Specifications

General

Brand	Oki
Model	B4300
Category	Print Server
Language	English