Configuration 15
7. Follow the on-screen instructions.
> The NetWare Client 32 or IntranetWare Client should be installed on the
PC used for the creation of network queues. Installation enables the user
to create network queues and perform other functions.
8. If the settings are correct, click [Execute]. The new settings are
transmitted to the network card but the network card is still operating
with pre-transmission settings.
9. Click [Finish] to validate the new settings. Depending on the model, the
printer may have to be switched off and on again.
Using a Web browser
If the print server is connected to the network using TCP/IP, its settings and
the printer menu settings can be configured using a Web browser, such as
Microsoft Internet Explorer Version 3.0 and higher, or Netscape Navigator
version 3.0 and higher. No guarantees are offered for other browsers. Refer to
the relevant manuals for details of how to launch and use the browser.
The network addresses used in this manual are shown as examples only.
Network addresses used in your installation must be generated from your own
network. To apply configuration changes using a Web browser, you will be
prompted for a username and password.The username is [root] and the default
password is the last six digits of the Ethernet address.
The following explanation uses Windows 95 and Microsoft Internet Explorer
version 4.0 as an example.
To Next Page
Loading...
Need help?
General
