Oki B4300 - TCP;IP Tab

Configuration 25
TCP/IP Tab
This allows you to configure TCP/IP related items.
Location Comments
Change root password You can set/change the root password for AdminManager, TELNET
and FTP.
Location Comments
Use TCP/IP Protocol Set TCP/IP protocol as enabled/disabled.
Use DHCP/BOOTP Check this item if IP address, subnet mask, default gateway and IP
addresses for DNS primary server and secondary servers are
retrieved from the DHCP or BOOTP server. Otherwise, clear.
Use RARP Check this item if IP address is retrieved from the RARP server.
Otherwise, clear.
IP Address Set the IP address of the selected network interface card.
Subnet Mask Set the subnet mask of the selected network interface card.
Default Gateway Set the default gateway of the selected network interface card.
Use FTP/LPD Banner Check this item if you want to add the FTP/LPD banner. Otherwise,
clear.
DNS Server . . . Set IP addresses for DNS primary and secondary servers.