Microsoft Windows 75
11. Confirm your configuration. If everything is correct, select
[Execute] to apply the configuration. Set-up has now been
completed. Select [Finish].
Now that both Windows and the printer have been configured to use TCP/
IP, the next step is to configure Windows to print to the network printer.
Windows 95/98/Me
When printing using TCP/IP, the Oki LPR utility is the only option to use.
The following procedure should be used.
When installing the driver, ensure it is installed as a local printer and not
a network printer. Ensure the appropriate printer driver has been installed
in Windows.
Install the Oki LPR utility as described on page 67 of this manual and add
the printer installed earlier.
To Next Page
Loading...
