UNIX 105
# cancel Cprinter_lp -456
Verify the printer status using the lpstat command.
# lpstat –pCprinter_lp
> The result of lpstat may not be displayed correctly depending on
UNIX operating system specification (e.g. Solaris 2.x).
FTP printing
FTP (File Transfer Protocol) is used for transferring a file with TCP/IP. If
the print data is sent to a logical printer via FTP, it is printed.
Refer to the workstation’s manual for details of the ftp command. The
following explanation uses print file test.prn with printer name
okiprinter_lp as an example.
Logical directories
The OkiLAN print server includes three logical directories.
lp must be used for printing a file created using the printer driver.
sjis must be used for printing a text file of Shift JIS Kanji code.
euc must be used for the printing a text file of the EUC Kanji code
> jis and euc function only as PostScript printers.
> You can not send data to the root directory.
1. Login to the network interface card.
When printing with ftp, use any values for name and password. However,
if the user name is [root], the password set under TELNET or the utility
are required. See the appropriate section for details.
Logical directory Printer function
lp For direct output
sjis For Shift JIS Kanji converted output
euc For EUC Kanji converted output
To Next Page
Loading...
Need help?
General
