Configuration 17
c. Select [Once per session] in [Document in cache is compared
to document on network].
If you change the window size of the browser immediately
after changing the configuration, [Security information] may
be displayed. Uncheck [Display this message next time] in the
dialogue.
4. After making changes, click [Submit].
5. Enter [root] in User name and your password (default is the last six
digits of the Ethernet address) in Password and click [OK].
6. After the new values are transmitted to the network card, the
following screen is displayed. If a different message is displayed,
check the settings.
For example: For Ethernet address 00:80:92:01:00:D2, a default password
is [0100D2]. The Ethernet address (MAC address) is displayed during the
self-diagnostic test.
The root password can be changed to allow you to configure the print
server and printer by using a Web browser. The default password is the
last six digits of the MAC address.
To Next Page
Loading...
