Oki B4300 - Page 59

Configuration 57
SMTP-1 [OKI Device
Setup]-
[SMTP]-
[Use SMTP
Transmit
Protocol]
[Network
Configuration]-
[Email Settings]-
[Email Transmit
Settings]-
[SMTP Transmit]
[Setup SMTP
(E-Mail)]-
[SMTP Transmit]
ENABLE/
DISABLE
Set sending E-
mail via
SMTP,
enabled or
disabled
SMTP-2 [OKI Device
Setup]-
[SMTP]-
[Use SMTP
Receive
Protocol]
[Network
Configuration]-
[Email Settings]-
[Email Receive
Settings]-
[SMTP Receive]
[Setup SMTP
(E-Mail)]-
[SMTP Receive]
ENABLE/
DISABLE
Set receiving
E-mail via
SMTP,
enabled or
disabled.
SMTP-3 [OKI Device
Setup]-
[SMTP]-
[SMTP Server
Address/Name]
[Network
Configuration]-
[Email Settings]-
[Email Transmit
Settings]-
[SMTP Server]
[Setup SMTP
(E-Mail)]-
[SMTP server
name]
0.0.0.0—
255.255.255.255
or host name up
to 64 characters.
(Default is null)
Set IP address
or host name
of SMTP
server
SMTP-4
[OKI Device
Setup]-
[SMTP]-
[Advanced . . .]-
[SMTP Port
Number]
[Network
Configuration]-
[Email Settings]-
[Email Transmit
Settings]-
[SMTP Port Number]
[Setup SMTP
(E-Mail)]-
[SMTP port
number]
1—65535 (25) Set port
number of
SMTP
SMTP-5 [OKI Device
Setup]-
[SMTP]-[E-
Mail Address]
[Network
Configuration]-
[Email Settings]-
[Email Transmit
Settings]-
[Printer Email
Address]
[Setup SMTP
(E-Mail)]-
[E-Mail address]
Any
alphanumeric
characters up to
78 characters.
(Default is null)
Set the E-mail
address that is
used for
[From] field in
the mail header
SMTP-6 [OKI Device
Setup]-
[SMTP]-
[Reply-To
Address]
[Network
Configuration]-
[Email Settings]-
[Email Transmit
Settings]-
[Reply-To-Address]
[Setup SMTP
(E-Mail)]-[Reply-
To address]
Any
alphanumeric
characters up to
78 characters.
(Default is null)
Set the E-mail
address that is
used for
[Reply-To]
field in the
mail header
SMTP-7 [OKI Device
Setup]-
[SMTP]-[1—
5]-[To Address
1—5]
[Network
Configuration]-
[Email Settings]-
[Email Recipients]-
[Email Address 1]—
[Email Address 5]
[Setup SMTP
(E-Mail)]-[Event
to address 1—5] –
[To Address 1—5]
Any
alphanumeric
characters up to
78 characters.
(Default is null)
Set E-mail
addresses to
that E-mail
should be sent.
Up to five E-
mail addresses
can be set
Ref. No. Admin
Manager
Web browser TELNET/
Diagnostic test
print
Available
options
Notes