UNIX 94
5. Type 1 and press the [Enter] key. Perform the following settings:
Please select (1- 99)? 1
No. Message Value
1 : TCP/ IP protocol : ENABLE
2 : IP address : 192.168.20.127
3 : Subnet Mask : 255.255.255.0
4 : Gateway address : 192.168.20.1
5 : RARP protocol : DISABLE
6 : DHCP/ BOOTP protocol: DISABLE
7 : root password : “ “
99 : Back to prior menu
Please select (1- 99)?
6. Log out from the network interface card. Turn the printer off and on
again to validate the following settings.
To Next Page
Loading...
