Oki B930dn User Manual

B930n User’s Guide> 130
The printer is not
connected.
Cause 1 On the Macintosh, the printer is not
selected correctly in the Chooser. Or, the
printer is processing another job.
Verification 1 Check that the printer is selected
correctly on the Macintosh. If the printer
is processing another job, the job must
be completed before the printer can be
connected.
Action 1 If the printer is still not connected
though it is selected correctly and is not
processing another job, check the
following causes.
Cause 2 The EtherTalk port of the printer is set
to [Disable]. Or, the Start/Stop setting
for EtherTalk has been set to Off by the
PostScript command. Or, the printer is
in the offline status
Verification 2 Check that the port used is set to
[Enable] and that the Start/ Stop
setting is set to [Start]. Check whether
Off-line is displayed on the printer
Operator Panel.
Action 2 If the printer still cannot be connected
although all the above conditions are
normal, contact service.
CAUSE TREATMENT

Oki B930dn Specifications

Performance

print speed	50 pages per minute
time to first page	7 seconds
print resolution	1200 x 1200 dpi
CPU	600 MHz
duty cycle	300, 000 pages per month

Memory

standard RAM memory	256 MB
maximum RAM memory	768 MB
bitmapped fonts	47 PCL

Weight and Dimensions

dimensions	20.0" x 25.0" x 21.0" (50.8 cm x 63.5 cm x 53.3 cm)
weight	90.0 lb. (32.1 kg)
paper size	5.8" x 8.3" min. to 11" x 17" max.