Oki B930dn User Manual

B930n User’s Guide> 86
-n No. of copies
This option specifies the number of copies. If one "lp" command is
issued to print multiple files, the number of copies specified by this
option will apply to all the files.
However, this option is effective when the printer is in the spool
mode. In the non-spool mode, the client must be a Windows NT
machine to use this option.
Precautions
• Among options not listed above (e.g. -m option), those not
processed by the workstation which sends the print
instructions will not be effective.
In the spool mode, up to 32 files can be printed by one "lp"
command. Files that come after the 32nd files will be ignored.
Sample
To print a file named "file1" to a printer set up as "P001", enter the
following command:
%lp -d P001 file1
To output three copies of "file1" and "file2" to "P001", enter the
following:
$lp -d P001 -n3 file1 file2
DELETE (CANCEL)
This cancel command is used to delete print data which has been
sent to print.
Command Format
cancel [Printer name] [Job Number]
C OMMAND O PTIONS
The following command options are available:

Oki B930dn Specifications

Performance

print speed	50 pages per minute
time to first page	7 seconds
print resolution	1200 x 1200 dpi
CPU	600 MHz
duty cycle	300, 000 pages per month

Memory

standard RAM memory	256 MB
maximum RAM memory	768 MB
bitmapped fonts	47 PCL

Weight and Dimensions

dimensions	20.0" x 25.0" x 21.0" (50.8 cm x 63.5 cm x 53.3 cm)
weight	90.0 lb. (32.1 kg)
paper size	5.8" x 8.3" min. to 11" x 17" max.