Oki B930dn User Manual

B930n User’s Guide> 106
M AINTENANCE
C LEANING THE P RINTER
This section describes how to clean the printer in order to maintain
the printer in good condition.
CAUTION
> CAUTION: Be sure to switch off and unplug the machine
before accessing the interior of the machine for
cleaning, maintenance, or fault clearance. Access to a
live machine’s interior can cause electric shock.
C LEANING THE EXTERIOR
Clean the exterior of the printer about once a month. Wipe the
surface with a damp, well-wrung soft cloth. Then wipe with another
dry soft cloth. For stubborn stains, moisten a soft cloth with a small
amount of neutral detergent, and gently wipe the stain off.
NOTE
> Do not spray the detergent directly on the printer. The
liquid detergent may enter the printer through a gap and
cause problems. Never use cleaning agents other than
neutral detergent.
C LEANING THE INTERIOR
After clearing paper jams or replacing the Toner Cartridge, inspect
the interior of the printer before closing the top cover
CAUTION

Oki B930dn Specifications

Performance

print speed	50 pages per minute
time to first page	7 seconds
print resolution	1200 x 1200 dpi
CPU	600 MHz
duty cycle	300, 000 pages per month

Memory

standard RAM memory	256 MB
maximum RAM memory	768 MB
bitmapped fonts	47 PCL

Weight and Dimensions

dimensions	20.0" x 25.0" x 21.0" (50.8 cm x 63.5 cm x 53.3 cm)
weight	90.0 lb. (32.1 kg)
paper size	5.8" x 8.3" min. to 11" x 17" max.